About Hamon Research-Cottrell Electrostatic Precipitator, Baghouse, Scrubber, NOx Reduction SCR & SNCR, Flue Gas Conditioning & Desulphurization Spare Parts for Electrostatic Precipitators Field Services, Consulting, Training Air Pollution Control Learning Center Contact Hamon Research-Cottrell

Welcome
Welcome
Hamon Divisions
Site Map



Choose your Industry:
Utility Power
Petrochemical/Refining
Others

Career Opportunities »

Customer Service »


 
Search 


Home   ›  Products   ›  Electrostatic Precipitators   ›  Collecting Electrodes

Precipitator collecting electrodes


The collecting plates are the grounded electrodes on which the incoming charged particulate is deposited. The "G" OpzelTM collecting electrode incorporates Hamon Research-Cottrell's traditional Optimum Precipitation Zone Electrode design that provides quiescent zones to aid in particulate collection and to reduce re-entrainment.          
G-Opzel(TM) collecting electrodes being shop welded at our USA manufacturing plant, Thermal Transfer Corporation     The collecting electrodes are sheet steel roll-formed into panel plates that are shop welded together into assemblies which reduces field installation time.


The plate's structural integrity is fortified by the addition of rolled tube stiffeners at the top and bottom to make the plate more dynamically responsive to rapping. The mounting pad design is a hyperbolic transition section which serves to gradually and efficiently introduce the rapping energy from the mounting pad into the collecting surface.    
Click here to learn more about our G-OpzelTM collecting electrode design.

Quick links to:
Collecting electrodes
Discharge electrodes
Rappers
Particulate disposal



Related Technical Articles (pdf):
  • HI-R Electrostatic Precipitators for a Belgian Steel Plant
  • Three Year Performance Evaluation of a new Rigid Electrode Precipitator
  • Electrostatic Precipitator Rebuild Strategies for Improved Particulate Emissions
  • Electrostatic Precipitator Upgrade Strategies - Get the Most From What you Have
  • Practical Problems with ESPs can provide significant contribution to science
  • Precipitator Replacements & Rebuilds - Where does the money go?
  • Rebuild & Enlargement of Existing Weighted Wire ESPs as a result of coal switching
  • Refurbishment of Baldwin Units #1 & 2 ESPs
  • Reviving an Electrostatic Precipitator
  • Wide Plate Spacing for Precipitators


  • About HRC    |    Products    |    Spare Parts    |    Services    |    APC Learning Center    |    Contact HRC
    HamonUSA sites:   Heat Recovery   |   Air Pollution Control   |   Chimneys, Stacks, Silos
    © HAMON. All rights reserved.

    Hamon USA Headquarters
    directions
    58 East Main Street
    Somerville, NJ 08876
    Tel. +1 908.685.4000
     
    Web design by iForum